Wotofo Pre-Built Coils - 10 Pack

No reviews yet
by Wotofo
Low stock - 1 available

Wotofo Pre-Built Coils - 10 Pack

0.17 Ohm Triple Core Fused Clapton: 3x26+38 3mm
Designed for sub ohm vaping it features a 0.17 Ohm resistance, the benefit of a triple wire build is you can use it at a higher temperature for increased cloud production.

0.22 Ohm Alien Clapton: 3x26+36 3mm
Featuring a 0.22 Ohm resistance they are made of Ni80 (NiChrome) which heats up faster than standard Kanthal. Please note, these coils can only be used in Variable Wattage mode.

0.24 Ohm Braided: 0.3x0.6+40x32 3mm
Braided coils have a larger surface area than standard wound coils, which means more e-liquid can be heated at a greater rate for better flavour and cloud.

0.26 Ohm Quad Core Fused Clapton: 28x4+36 3mm
The benefit of a quad wire build is you can use it at higher temperatures, for increased cloud production. This coil uses NI80 wire that offers a faster ramp-up than traditional Kanthal.

0.28 Ohm Juggernaut: 26x2+36 3mm
Juggernaut Coils features two fused Clapton coils wrapped with ribbon wire and have been designed for high wattage vaping and to produce large clouds.

0.3 Ohm Alien Clapton: 3x28+36 3mm
Alien coils feature a complex build that involves a combination of thinner wires wrapped around a thicker core wire. The result is a faster ramp-up and low resistance.

0.33 Ohm Framed Staple Clapton: 28+38x9+28+36 3mm
Core fused models feature an extra strand of thinner wire on the inside of each build. The benefit of this type of coil is that it will heat up a lot faster, even though it has a lower resistance.

0.5 Ohm Fused Clapton: 26+38 ⌀2.5mm
The fused core helps to increase cloud production. Featuring a 0.5 Ohm resistance these coils are ideal for sub ohm vaping.

0.62 Ohm Dual Core Fused Clapton: 28x2+38 ⌀3mm
Dual Fused Clapton Coils are made up of two fused core wires with a wire wrapped around them. This coil offers a balance between cloud and flavour production.

Compatible with:

Rebuildable coils like these can only be used with rebuildable atomisers, such as RDTAs, RTAs and RDAs. We would only recommend these types of coils to advanced vapers, who have a thorough understanding of vaping, Ohm’s law and battery safety. Rebuildable coils will need to have cotton wicks fitted to them before use, these are available separately.

Before use, all rebuildable coils should be tested on Ohmmeter to check they are registering the correct resistance and are firing correctly. Please note that when using a dual coil build, the resistance of your coils will halve. For example, two 0.4 Ohm coils fitted to a rebuildable atomiser will register 0.2 Ohm. Different types of coil can not be mixed and matched.